top of page
Dual-Slot CFexpress Type B and XQD Card Reader USB 3.2 Gen 2 10Gbps

Dual-Slot CFexpress Type B and XQD Card Reader USB 3.2 Gen 2 10Gbps

SKU: 9312

Dual-Slot CFexpress & XQD Card Reader

 

  • Dual Slot Design:Compatible with CFexpress Card (Type-B) and XQD Card (Compatible with Sony G/M Series, Lexar 2933x/1400x USB Mark XQD Card)
  • High Speed: USB3.2 Gen 2 theoretical transmission speed 10Gbps; Transfer from both card simultaneously at full speed 1.25Gb/S; Backward compatible with USB 3.1 and USB 3.0 up to 5Gbps.
  • Compatible Multi OS:Windows 7/ 8/ 8.1/ 10/ Linux/ MAC OS
  • Package Included: 1x CFexpress & XQD Card Redaer; 1 x USB-A TO C Cable ;1 x Type C TO C Cable

 

Notice: Should the card reader is not able to recognize the storage medias when we're trying to access both an XQD and CFexpress Card simultaneously, please remove one of cards and the card reader would operate just fine. As accessing to both cards simultaneously using this dual card reader requires a certain amount of electric current, which some USB ports may not be able to support that.

 

CFexpress Type B Memory Card is a storage media used on:

Canon EOS-1D X Mark III - DSLR Camera
Canon EOS R5 - Mirrorless Camera
Canon EOS R3 - Mirrorless Camera
Canon EOS C300 Mark III - Cinema EOS Camcorders
Canon EOS C500 Mark II

Nikon D6 DSLR Camera
Nikon Z6 Mirrorless Camera
Nikon Z6ii Mirrorless Camera
Nikon Z7 Mirrorless Camera
Nikon Z7ii Mirrorless Camera
Nikon Z9 Mirrorless Camera
Nikon D850 (with firmware update)

Panasonic Lumix DC-S1GA / DC-S1MGA
Panasonic Lumix DC-S1RGA / DC-S1RMGA
Panasonic Lumix DC-GH6 / DC-GH6L 

 

=======================================

Frequently Asked Question about this product (FAQ)

=======================================

Q: Why is my Card Reader / External Drive not Auto-Detected or being Auto-Assigned a Drive Letter each time it is connected to my Windows OS computer / laptop?

 

A: When you are facing “non-auto-assigning Drive Letter” issue using external card readers & USB Flash Drives, perform the below to solve the issue.

 

Making sure that the Virtual Disk service is running. You can check the status of this service in the services management console (services.msc).

 

This is how to do that:

Go to <Computer Management>
Click on <Services> Tab
Browse the list appeared for <Virtual Disk> and Double Click on it
Making sure the “Service Status” shows “Running” & all START, PAUSE & RESUME buttons are dimmed. If “Service Status” showing as “Stopped”, CLICK ON THE “START” button.
Restart your computer and try it again, the systems should now be able to auto-detect / auto-assign drive letters to all external card readers or drives.

    $79.00 通常価格
    $49.77セール価格

    SSD Enclosures

    bottom of page