top of page
CFexpress Type A Card Reader ,USB 3.1 Gen 2 10Gbps, Mini Portable Aluminum Exter

CFexpress Type A Card Reader ,USB 3.1 Gen 2 10Gbps, Mini Portable Aluminum Exter

SKU: 9111A

CFexpress Type A Card Reader USB 3.1 Gen 2 10 Gbps


 - CompatibilityOnly for CFexpress Type A Memory Card


- Compatible with multiple Operating Systems (OS): MacOS / Windows 7/8 / 8.1 / 10 / Linux / MAC OS


- High Speed: USB3.1 Gen 2 theoretical transmission speed 10Gbps & backward compatible with USB 3.1 and USB 3.0 up to theoretical speed at 5Gbps; with the capability of READ/WRITE of the CFexpress Type A Memory Card at a theoretical performance of 1000Mb/s.


- Package inclusion:

1x CFexpress Type A Memory Card Redaer

1 x USB-A TO C Cable

1 x Type C TO C Cable


- Kindly contact us should the device of yours is not recognizing the card reader.


Note: Actual performance may vary based on host device, file attributes, usage conditions, and other factors.




Product specifications:

Host Interface: 1 X USB Type-C female connector


Drive Interface: 1 X CFexpress Card Type-A Slot


Power: Bus-Powered


1 x LED indicator


Push to Push CFX socket


Plug & Play, no driver needed.


Dimensions: 67mm x 65mm x 11mm


Weight: 90g

CFexpress Type A Memory Card is a storage media used on:
Sony a7S III - ILCE-7SM3  - Sony a7S III Mirrorless Camera

Sony A1 - ILCE-1 - Sony a1 Mirrorless Camera

Sony a7 IV - ILCE-7M4 / ILCE-7M4K - Sony a7 IV Mirrorless Camera

Sony FX3 ILME-FX3 - Sony Full-frame Cinema Line camera

Sony FX6 - ILME-FX6V - Sony FX6 Full-Frame Cinema Camera



Frequently Asked Question about this product (FAQ)


Q: Why is my Card Reader / External Drive not Auto-Detected or being Auto-Assigned a Drive Letter each time it is connected to my Windows OS computer / laptop?


A: When you are facing “non-auto-assigning Drive Letter” issue using external card readers & USB Flash Drives, perform the below to solve the issue.


Making sure that the Virtual Disk service is running. You can check the status of this service in the services management console (services.msc).


This is how to do that:

  • Go to <Computer Management>
  • Click on <Services> Tab
  • Browse the list appeared for <Virtual Disk> and Double Click on it
  • Making sure the “Service Status” shows “Running” & all START, PAUSE & RESUME buttons are dimmed. If “Service Status” showing as “Stopped”, CLICK ON THE “START” button.
  • Restart your computer and try it again, the systems should now be able to auto-detect / auto-assign drive letters to all external card readers or drives.



      SSD Enclosures

      bottom of page